ELLENCE® Dosage and Administration

(epirubicin HCl)

2 DOSAGE AND ADMINISTRATION

2.1 Important Administration Instructions

When possible, to reduce the risk of developing cardiotoxicity in patients receiving ELLENCE after stopping treatment with other cardiotoxic agents, especially those with long half-lives such as trastuzumab, delay ELLENCE-based therapy until the other agents have cleared from the circulation [see Warnings and Precautions (5.1)].

Antiemetics may reduce nausea and vomiting; consider use of antiemetics before administration of ELLENCE or when clinically indicated, particularly when given in conjunction with other emetigenic drugs [see Adverse Reactions (6.1)].

Patients administered the 120 mg/m2 regimen of ELLENCE should receive prophylactic antibiotic therapy.

2.2 Recommended Dose

The recommended dose of ELLENCE is 100 to 120 mg/m2 administered as an intravenous bolus [see Dosage and Administration (2.4)].

The following regimens are recommended:

CEF-120:Cyclophosphamide75 mg/m2 oral on Days 1 to 14
ELLENCE60 mg/m2 intravenously on Days 1 and 8
5-Fluorouracil500 mg/m2 intravenously on Days 1 and 8
Repeat every 28 days for 6 cycles
FEC-100:5-Fluorouracil500 mg/m2 intravenously on Day 1
ELLENCE100 mg/m2 intravenously on Day 1
Cyclophosphamide500 mg/m2 intravenously on Day 1
Repeat every 21 days for 6 cycles

Administer ELLENCE in repeated 3- to 4-week cycles. The total dose of ELLENCE may be given on Day 1 of each cycle or divided equally and given on Days 1 and 8 of each cycle.

2.3 Dose Modifications

ELLENCE dosage adjustments for hematologic and non-hematologic toxicities within a cycle of treatment, is based on nadir platelet counts <50,000/mm3, absolute neutrophil counts (ANC) <250/mm3, neutropenic fever, or Grades 3/4 nonhematologic toxicity. Reduce ELLENCE Day 1 dose in subsequent cycles to 75% of the Day 1 dose given in the current cycle. Delay Day 1 chemotherapy in subsequent courses of treatment until platelet counts are ≥100,000/mm3, ANC ≥1500/mm3, and nonhematologic toxicities have recovered to ≤ Grade 1.

Cardiac Toxicity

Discontinue ELLENCE in patients who develop signs or symptoms of cardiomyopathy [see Warnings and Precautions (5.1)].

Bone Marrow Dysfunction

Consider administering a lower starting dose (75–90 mg/m2) for heavily pretreated patients, patients with pre-existing bone marrow depression, or in the presence of neoplastic bone marrow infiltration [see Warnings and Precautions (5.4)]. For patients receiving a divided dose of ELLENCE (Day 1 and Day 8), the Day 8 dose should be 75% of Day 1 if platelet counts are 75,000–100,000/mm3 and ANC is 1000 to 1499/mm3. If Day 8 platelet counts are <75,000/mm3, ANC <1000/mm3, or Grades 3/4 nonhematologic toxicity has occurred, omit the Day 8 dose.

Hepatic Impairment

In patients with elevated serum AST or serum total bilirubin concentrations [see Warnings and Precautions (5.5) and Clinical Pharmacology (12.3)], reduce dosage as follows:

  • Bilirubin 1.2 to 3 mg/dL or AST 2 to 4 times upper limit of normal 1/2 of recommended starting dose
  • Bilirubin > 3 mg/dL or AST > 4 times upper limit of normal 1/4 of recommended starting dose

Renal Impairment

Consider lower doses in patients with severe renal impairment (serum creatinine > 5 mg/dL) [see Warnings and Precautions (5.6) and Clinical Pharmacology (12.3)].

2.4 Preparation and Administration Precautions

Preparation

Storage of the solution for injection at refrigerated conditions can result in the formation of a gelled product. This gelled product will return to a slightly viscous to mobile solution after 2 to a maximum of 4 hours equilibration at controlled room temperature (15–25°C).

Inspect parenteral drug products visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

ELLENCE is a cytotoxic drug. Follow applicable special handling and disposable procedures1 [see References (15)].

Incompatibilities

Avoid prolonged contact with any solution of an alkaline pH as it will result in hydrolysis of the drug. Do not mix ELLENCE with heparin or fluorouracil due to chemical incompatibility that may lead to precipitation.

ELLENCE can be used in combination with other antitumor agents, but do not mix with other drugs in the same syringe.

Administration

Administer ELLENCE into the tubing of a freely flowing intravenous infusion (0.9% sodium chloride or 5% glucose solution). Patients receiving initial therapy at the recommended starting doses of 100–120 mg/m2 should generally have ELLENCE infused over 15–20 minutes.

For patients who require lower ELLENCE starting doses due to organ dysfunction or who require modification of ELLENCE doses during therapy, the ELLENCE infusion time may be proportionally decreased, but should not be less than 3 minutes. This technique is intended to minimize the risk of thrombosis or perivenous extravasation, which could lead to severe cellulitis, vesication, or tissue necrosis.

A direct push injection is not recommended due to the risk of extravasation, which may occur even in the presence of adequate blood return upon needle aspiration. Venous sclerosis may result from injection into small vessels or repeated injections into the same vein [see Warnings and Precautions (5.3)].

Storage

Use ELLENCE within 24 hours of first penetration of the rubber stopper. Discard any unused solution.

Find ELLENCE® medical information:

Find ELLENCE® medical information:

Our scientific content is evidence-based, scientifically balanced and non-promotional. It undergoes rigorous internal medical review and is updated regularly to reflect new information.

ELLENCE® Quick Finder

Prescribing Information
Download Prescribing Information

Health Professional Information

Dosage and Administration

2 DOSAGE AND ADMINISTRATION

2.1 Important Administration Instructions

When possible, to reduce the risk of developing cardiotoxicity in patients receiving ELLENCE after stopping treatment with other cardiotoxic agents, especially those with long half-lives such as trastuzumab, delay ELLENCE-based therapy until the other agents have cleared from the circulation [see Warnings and Precautions (5.1)].

Antiemetics may reduce nausea and vomiting; consider use of antiemetics before administration of ELLENCE or when clinically indicated, particularly when given in conjunction with other emetigenic drugs [see Adverse Reactions (6.1)].

Patients administered the 120 mg/m2 regimen of ELLENCE should receive prophylactic antibiotic therapy.

2.2 Recommended Dose

The recommended dose of ELLENCE is 100 to 120 mg/m2 administered as an intravenous bolus [see Dosage and Administration (2.4)].

The following regimens are recommended:

CEF-120:Cyclophosphamide75 mg/m2 oral on Days 1 to 14
ELLENCE60 mg/m2 intravenously on Days 1 and 8
5-Fluorouracil500 mg/m2 intravenously on Days 1 and 8
Repeat every 28 days for 6 cycles
FEC-100:5-Fluorouracil500 mg/m2 intravenously on Day 1
ELLENCE100 mg/m2 intravenously on Day 1
Cyclophosphamide500 mg/m2 intravenously on Day 1
Repeat every 21 days for 6 cycles

Administer ELLENCE in repeated 3- to 4-week cycles. The total dose of ELLENCE may be given on Day 1 of each cycle or divided equally and given on Days 1 and 8 of each cycle.

2.3 Dose Modifications

ELLENCE dosage adjustments for hematologic and non-hematologic toxicities within a cycle of treatment, is based on nadir platelet counts <50,000/mm3, absolute neutrophil counts (ANC) <250/mm3, neutropenic fever, or Grades 3/4 nonhematologic toxicity. Reduce ELLENCE Day 1 dose in subsequent cycles to 75% of the Day 1 dose given in the current cycle. Delay Day 1 chemotherapy in subsequent courses of treatment until platelet counts are ≥100,000/mm3, ANC ≥1500/mm3, and nonhematologic toxicities have recovered to ≤ Grade 1.

Cardiac Toxicity

Discontinue ELLENCE in patients who develop signs or symptoms of cardiomyopathy [see Warnings and Precautions (5.1)].

Bone Marrow Dysfunction

Consider administering a lower starting dose (75–90 mg/m2) for heavily pretreated patients, patients with pre-existing bone marrow depression, or in the presence of neoplastic bone marrow infiltration [see Warnings and Precautions (5.4)]. For patients receiving a divided dose of ELLENCE (Day 1 and Day 8), the Day 8 dose should be 75% of Day 1 if platelet counts are 75,000–100,000/mm3 and ANC is 1000 to 1499/mm3. If Day 8 platelet counts are <75,000/mm3, ANC <1000/mm3, or Grades 3/4 nonhematologic toxicity has occurred, omit the Day 8 dose.

Hepatic Impairment

In patients with elevated serum AST or serum total bilirubin concentrations [see Warnings and Precautions (5.5) and Clinical Pharmacology (12.3)], reduce dosage as follows:

  • Bilirubin 1.2 to 3 mg/dL or AST 2 to 4 times upper limit of normal 1/2 of recommended starting dose
  • Bilirubin > 3 mg/dL or AST > 4 times upper limit of normal 1/4 of recommended starting dose

Renal Impairment

Consider lower doses in patients with severe renal impairment (serum creatinine > 5 mg/dL) [see Warnings and Precautions (5.6) and Clinical Pharmacology (12.3)].

2.4 Preparation and Administration Precautions

Preparation

Storage of the solution for injection at refrigerated conditions can result in the formation of a gelled product. This gelled product will return to a slightly viscous to mobile solution after 2 to a maximum of 4 hours equilibration at controlled room temperature (15–25°C).

Inspect parenteral drug products visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

ELLENCE is a cytotoxic drug. Follow applicable special handling and disposable procedures1 [see References (15)].

Incompatibilities

Avoid prolonged contact with any solution of an alkaline pH as it will result in hydrolysis of the drug. Do not mix ELLENCE with heparin or fluorouracil due to chemical incompatibility that may lead to precipitation.

ELLENCE can be used in combination with other antitumor agents, but do not mix with other drugs in the same syringe.

Administration

Administer ELLENCE into the tubing of a freely flowing intravenous infusion (0.9% sodium chloride or 5% glucose solution). Patients receiving initial therapy at the recommended starting doses of 100–120 mg/m2 should generally have ELLENCE infused over 15–20 minutes.

For patients who require lower ELLENCE starting doses due to organ dysfunction or who require modification of ELLENCE doses during therapy, the ELLENCE infusion time may be proportionally decreased, but should not be less than 3 minutes. This technique is intended to minimize the risk of thrombosis or perivenous extravasation, which could lead to severe cellulitis, vesication, or tissue necrosis.

A direct push injection is not recommended due to the risk of extravasation, which may occur even in the presence of adequate blood return upon needle aspiration. Venous sclerosis may result from injection into small vessels or repeated injections into the same vein [see Warnings and Precautions (5.3)].

Storage

Use ELLENCE within 24 hours of first penetration of the rubber stopper. Discard any unused solution.

Medication Guide

Health Professional Information

{{section_name_patient}}

{{section_body_html_patient}}

Resources

Didn’t find what you were looking for? Contact us.

MI Digital Assistant

Chat online with Pfizer Medical Information regarding your inquiry on a Pfizer medicine.

Call 800-438-1985*

*Speak with a Pfizer Medical Information Professional regarding your medical inquiry. Available 9AM-5Pm ET Monday to Friday; excluding holidays.

Medical Inquiry

Submit a medical question for Pfizer prescription products.

Report Adverse Event

Pfizer Safety

To report an adverse event related to the Pfizer-BioNTech COVID-19 Vaccine, and you are not part of a clinical trial* for this product, click the link below to submit your information:

Pfizer Safety Reporting Site

*If you are involved in a clinical trial for this product, adverse events should be reported to your coordinating study site.

If you cannot use the above website, or would like to report an adverse event related to a different Pfizer product, please call Pfizer Safety at (800) 438-1985.

FDA Medwatch

You may also contact the U.S. Food and Drug Administration (FDA) directly to report adverse events or product quality concerns either online at www.fda.gov/medwatch or call (800) 822-7967.